PSR-11-37-D7
Replacement for Analox, OMS, UBS O2 Stick, ScubaPro, Analox, IT Gambert, and Maxtec. More info…
Advanced galvanic type oxygen sensor with excellent stability and accuracy under stringent applications. All sensors are subjected to the most extensive stability test, output in air, 30″ of water column pressure test and stability at 100% oxygen. The widest range of oxygen sensors offered by Analytical Industries, Inc. are “Made in USA”
OEM Equipment:
Analox (O2 D11)
OMS (Original)
UBS O2 Stick
ScubaPro
Analox 9212-O
IT Gambert D-03
Maxtec MAX-303s
Teledyne R-33D
Technical Specifications
| Measuring Range | 0-100% |
| Accuracy1 | +/-2% of Full Scale |
| Signal Output2 | 25+/- mV |
| Linearity | +/-2% of Full Scale |
| Response T90 | 6 sec |
| Temp Coefficient | compensated |
| Operating Temp | 0 to 45oC |
| Recommended Storage3 | 0 to 25oC |
| Temperature Coefficient | Compensated |
| Shelf Life4 | 6 months |
| Humidity Non-condensing | 0-99% RH |
| Expected Life | 42 months |
| Warranty5 | 12 months |
| Electrical Conn | 2 Pin female Molex |
Conditions:
Specification validated during design and in pursuit of improvement are subject to change without notice
1) At constant temperature and pressure. 2) In air (20.9% oxygen) at 25oC and 1 atm. 3) Sensor may be stored up to 55oC on an intermittent basis, for example, during transportation. 4) In original Package at 25oC and 1 atm. 5) Under normal operating conditions, the sensor is warranted to be free of defects in material and workmanship for the specified period provided the sensor is properly installed and operated. The sole remedy for sensor determined to be defective by Analytical Industries Inc. is limited to replacing the sensor. Analytical Industries In. will not be liable for buyer’s negligence, misapplication, abuse or accident.
Reviews
There are no reviews yet.